HMF-150

Wood Furnace

Triple the fuel, triple the dependability

Go away for an extended period without worrying about keeping your wood furnace operational.

Product Information

FIND A DEALER

Napoleon’s Hybrid HMF150 combination furnace is an extremely clean burning wood furnace, with an efficiency rating of 88.6% and emissions of 3.4 grams per hour. The Napoleon Hybrid HMF150 furnace is one of the cleanest and most efficient combination solid fuel burning furnaces on the market today.

Go away for an extended period without worrying about keeping your wood furnace operational. The Napoleon Hybrid HMF150 switches from wood to oil or electric automatically. If the furnace runs out of wood, a second thermostat controlling the optional oil and/or electric components will keep your home warm and toasty even if you are not at home, without any interruptions. Even with power failures, the furnace (wood only) is designed to use gravity air flow for emergency heating.

Extreme high efficiency has never been greener thanks to renewable energy and superior engineering. Napoleon’s new Canadian made gas furnace, the 9600 series, has been configured to operate with the multi-fuel Hybrid150 furnace that heats with wood, electric or oil. This combination goes beyond superior performance by integrating the environmentally friendly features of the HMF150 with the extremely high efficiency features of the 96% AFUE gas furnace.

The Editor’s at Green Builder. magazine have selected the HMF150 for their HOT 50 Product list; a collection of advanced products that their editor’s believe will have a significant impact on sustainable construction.

MULTI-FUEL COMBINATION FURNACE

Front Cutaway Image
Front Cutaway Image
Side Cutaway Image
Side Cutaway Image

Triple Fuel Combination for Added Convenience and Peace of Mind

Go away for an extended period without worrying about keeping your wood furnace operational. Napoleon Hybrid HMF150 switches from wood to oil or electric automatically. If the furnace runs out of wood, a second thermostat controlling the optional oil and/or electric components will keep your home warm and toasty even if you are not at home, without any interruptions. Even with power failures, the furnace (wood only) is designed to use gravity flow for emergency heating. A manual override lever is a standard function. Your choice of Beckett or Riello high-efficiency burners combined with the stainless steel combustion and heat exchanger module will give you many years of reliable and safe performance.

Advanced Combustion System

Four stainless steel tube combustion system achieves a secondary burn cycle. Not only are you getting energy from the wood, but also from the wood gases which are mixed at the precise ratio of temperature and oxygen. To achieve an extraordinary clean burn without a catalytic combustor, horizontal jets of super heated secondary air are mixed with the fire’s smoke to burn off released smoke particles. You can watch the torch-like secondary flames just below the ceiling during the burn resulting in more heat, cleaner air, fast start up, less chimney maintenance and less trips to the woodpile.

The impressively large 3.4 cubic foot solid built, fully welded and completely lined combustion chamber will give you many years of safe and trouble free performance.  The bypass damper and preheated outside air feed directly into the combustion chamber, providing rapid responsiveness and maximum heat control.  The thermostat sets the desired heat level for a roaring fire and then shuts down for a long, clean and consistent burn.

Solid Construction and Automatic Combustion Control